| Geoff Calvert, Technical Director, has over 25 years of experience of experimental stress analysis in the marine, aerospace and automotive industries. The following are examples of his authored and co-authored technical papers on the subject over the last 10 years. |
| |
- Applications of Modern Automated Photoelasticity to Industrial Problems
- G Calvert, University of Warwick; J Lesniak, Stress Photonics Inc;
- Insight: Journal of The British Institute of Non-Destructive Testing, Vol 44, No 4, pp224-228
- April 2002
|
- Stress Analysis Using Rapid Prototyping Techniques
- G Calvert
- Rapid Phototyping Casebook, Professional Engineering Publishing Ltd, Section 1, pp45-52
- 2001
|
- Rapid Prototyping - Getting the Material Right!
- G Calvert, Rover Group Ltd
- Material Testing Seminar '99, Organised by NPL at the National Motorcycle Museum, Solihull, UK
- May 1999
|
- Developments in Rapid Thermoelastic Analysis
- G Calvert, Rover Group Ltd
- Strain Magazine: Journal of the British Society of Strain Measurement, pp67-71
- May 1999
|
- Developments in Photoelastic Model Manufacture
- G Calvert, Rover Group Ltd
- Photoelastic Seminar, Organised by the British Society of Strain Measurement at The University of Warwick, UK
- September 1998
|
- Rapid Experimental Conceptual Analysis
- C Driver, R Winder, G Calvert, Rover Group Ltd; J MacDonald, Prof P Bryanston-Cross, D Udrea, University of Warwick
- Rapid Prototyping and Manufacturing '98 Conference and Exposition, Dearbourne, Michigan, USA
- May 1998
|
- The Application of Particle Image Velocimetry (PIV) and Flow Visualisation to the Coolant Flow Through an Automotive Engine
- D Udrea, Prof P Bryanston-Cross, University of Warwick; C Driver, G Calvert, Rover Group Ltd
- Proceedings of the International Conference on Optical Methods and Data Processing in Heat and Fluid Flow, pp343-350, Organised by the Institution of Mechanical Engineers at City University, London, UK
- April 1998
|
- Design Validation
- G Calvert, Rover Group Ltd
- Design for Business Conference, University of Warwick, UK
- October 1997
|
- Rapid Experimental Coolant Flow Analysis
- C Driver, G Calvert, Rover Group Ltd; J MacDonald, Prof P Bryanston-Cross, D Udrea, University of Warwick
- Rapid News, Vol 5, No 7, pp28-30
|
- Proceedings of the Time-Compression Technologies Conference 1997
- pp57-63, Rapid News Publications, held at the Heritage Motor Centre, Gaydon, Warwickshire, UK
- September 1997
|
- Validation of Rapid Prototyping Material for Rapid Experimental Stress Analysis
- G Calvert, Rover Group Ltd; C Schley, University of Warwick
- Eighth Solid Freeform Fabrication Symposium, University of Texas, Austin, Texas, USA
- August 1997
|
- A Comparison of Thermoelastic and Numerical Stress Results for Moulded Composite Plates
- M Pinfold, University of Warwick; G Calvert, Rover Group Ltd; C Garroch, P Stanley, University of Manchester
- Experimental Techniques and Design in Composite Materials 3, Cagliari, Italy
- October 1996
|
- Rapid Experimental Analysis of Flow
- G Calvert, C Driver, Rover Group Ltd; J McDonald, University of Warwick
- Time-Compression Technologies Conference 1996, Heritage Motor Centre, Gaydon, Warwickshire, UK
- September 1996
|
- Ensuring Reliability in the Design of Internal Combustion Engine Components
- Prof I Allison, University of Warwick; G Calvert, Rover Group Ltd
- British Society of Strain Measurement Annual Conference, Exeter University, UK
- August 1996
|
- Rapid Experimental Design Validation Techniques
- G Calvert, Rover Group Ltd
- Warwick Manufacturing Group Chiang Foundation Design and Development Programme, University of Warwick, UK
- November 1995
|
- Rapid Prototyping Helping Flow Visualisation at Rover
- G Calvert, Rover Group Ltd
- Annual Conference of The Society of Experimental Mechanics, Dearborn, Michigan, USA
- October 1995
|
- The Effect of Material Flow on the Stress Analysis of an SMC Component
- M Pinfold, University of Warwick; G Calvert, Rover Group Ltd
- Journal of Composite Structures, 8th International Conference on Composite Structures, University of Paisley, UK
- September 1995
|
- Rapid Prototyping and its Use for Experimental Analysis
- G.Calvert, Rover Group
- Computers in Engineering: a Boon or a Burden?, Annual Conference of the Engineering Integrity Society, Sheffield Hallam University, UK
- April 1995
|
- Application of Experimental and Rapid Prototyping Techniques
- G Calvert Rover Group Ltd
- Rapid Prototyping and Tooling Consortium Medical Conference, University of Warwick, UK
- December 1994
|
- Rapid Prototyping and Experimental Techniques
- G Calvert, Rover Group Ltd
- Euromotor Course on Rapid Prototyping and Tooling Exhibition, University of Warwick, UK
- October 1994
|
- Experimental Validation of the Analysis of an Automotive Composite Subframe
- G Calvert, Rover Group Ltd; M Pinfold, University of Warwick
- Composite Material Conference, University of Sheffield, UK
- September 1994
|
- Flow Visualisation
- G Calvert, Rover Group Ltd
- Rapid News: Journal of the Rapid Prototyping and Tooling Consortium
- Spring 1994
|
- Rapid Prototyping for Experimental Analysis
- G Calvert, Rover Group Ltd
- Proceedings of the Colloquium on Rapid Prototyping in the UK, IEE Manufacturing Division Conference, Digest No 1994/077, Paper 7
- March 1994
|
- Experimental Validation of a Composite Automotive Suspension Arm
- G Calvert, Rover Group; M Pinfold, University of Warwick
- Composites Journal
- January 1994
|
- Rapid Photoelastic Analysis
- G Calvert, K Allin, Rover Group Ltd
- Proceedings of the International Conference on Photoelasticity: New Instrumentation, Materials and Data Processing Techniques, Organised by SIRA at London, UK
- November 1993
|
- Rapid Prototyping Alleviates Stress
- K Allin, G Calvert, Rover Group Ltd
- Rapid News: Journal of the Rapid Prototyping and Tooling Consortium
- Autumn 1993
|
- Rapid Prototyping Applied to Experimental Techniques
- G Calvert, Rover Group Ltd
- Rapid Prototyping and Tooling Consortium Seminar, University of Warwick, UK
- September 1993
|
- Validation of the Finite Element Analysis of a Composite Automotive Suspension Arm
- G Calvert, Rover Group Ltd; M Pinfold, University of Warwick
- NAFEMS Benchmark
- December 1992
|
